Manifolds and Pressure Balancers

Manifolds are designed to divide heating water from one source into separate heating circuits. HV-SG manifolds permit connecting a safety assembly (safety and air vent valve, pressure gauge – in insulation) and an expansion vessel or a drain valve.

Pressure balancers ensure dynamic pressure balancing in a heating system caused by different flow rates through pump stations and a boiler.

  • 9191_5

    Wall support for manifold/collector

    A pair of supports for wall mount of a manifold. ). Distance between a wall and centre of the manifold is 100 mm.

    28.58 Excl. Btwincl. btw

    Meer informatie
  • 9190_5

    Wall Support for HVDT pressure balancers

    A pair of supports for wall mount of a HVDT pressure balancer (with a 110×110 mm thermo-insulating case). Distance between a wall and centre of the HVDT is 100 mm.

    31.50 Excl. Btwincl. btw

    Meer informatie
  • 9187_5

    Safety Assembly with Insulation

    Safety assembly with 20 mm EPS insulation. Housing in forged brass, 1” F connection. It consists of: a safety valve, 3 bar, 1/2“; air vent valve, 12 bar; pressure gauge, 63 mm. diam., 0-4 bar; support; 2 non-return valves.

    46.38 Excl. Btwincl. btw

    Meer informatie
  • 9507_5

    HV 60/125-2 Manifold/Collector

    Insulated Manifold, connects 2 heating circuits, for max. 2 m3/h flowrate. It permits fitting pump stations to heating circuits and connecting a heat source either directly or via hydraulic pressure balancer.

    154.20 Excl. Btwincl. btw

    Meer informatie
  • 9186_5

    HV 60/125 SG-2 Manifold/Collector

    Insulated Manifold, connects 2 heating circuits, for max. 2 m3/h flowrate. It permits fitting pump stations to heating circuits and connecting a heat source either directly or via hydraulic pressure balancer. This model also permits to connect an expansion vessel and a safety assembly.

    171.30 Excl. Btwincl. btw

    Meer informatie
  • 9188_6

    HVDT Pressure Balancer, 1“

    Pressure balancer for primary and secondary circuit. It makes possible balancing different flow rates through pump stations and a boiler. It is used to connect a boiler equipped with its own circulation pump to a manifold. It is not intended to connect a manifold to a thermal store. Thermo-insulating case 110 × 110 mm. Incl. fittings between manifold and balancer.

    172.50 Excl. Btwincl. btw

    Meer informatie
  • 9508_5

    HV 60/125-3 Manifold/Collector

    Insulated Manifold, connects 3 heating circuits, for max. 2 m3/h flowrate. It permits fitting pump stations to heating circuits and connecting a heat source either directly or via hydraulic pressure balancer.

    178.80 Excl. Btwincl. btw

    Meer informatie
  • 9187_5

    HV 60/125 SG-3 Manifold/Collector

    Insulated Manifold, connects 2 heating circuits, for max. 3 m3/h flowrate. It permits fitting pump stations to heating circuits and connecting a heat source either directly or via hydraulic pressure balancer. This model also permits to connect an expansion vessel and a safety assembly.

    197.10 Excl. Btwincl. btw

    Meer informatie
  • 9509_5

    HV 70/125-4 Manifold/Collector

    Insulated Manifold, connects 4 heating circuits, for max. 3 m3/h flowrate. It permits fitting pump stations to heating circuits and connecting a heat source either directly or via hydraulic pressure balancer. An expansion vessel can be also connected.

    250.00 Excl. Btwincl. btw

    Meer informatie
  • 9510_5

    HV 70/125-5 Manifold/Collector

    Insulated Manifold, connects 5 heating circuits, for max. 3 m3/h flowrate. It permits fitting pump stations to heating circuits and connecting a heat source either directly or via hydraulic pressure balancer. An expansion vessel can be also connected.

    322.00 Excl. Btwincl. btw

    Meer informatie
  • 9511_5

    HV 70/125-6 Manifold/Collector

    Insulated Manifold, connects 6 heating circuits, for max. 3 m3/h flowrate. It permits fitting pump stations to heating circuits and connecting a heat source either directly or via hydraulic pressure balancer. An expansion vessel can be also connected.

    371.00 Excl. Btwincl. btw

    Meer informatie